HX2262 Remote encoder circuit: Difference between revisions

From Yggenyk
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 2: Line 2:
[[Category:Electronics]]
[[Category:Electronics]]
[[Category:Elektronik]]
[[Category:Elektronik]]
<google>HX2262-HX2272</google>
<google>HX2262-HX2272</google>
HX2262 is equivalent to PT2262
HX2262 is equivalent to PT2262

Latest revision as of 11:02, 30 August 2008

<google>HX2262-HX2272</google> HX2262 is equivalent to PT2262

1. Description

HX2262 is a remote control encoder for encoding signals to be decoded by the HX2272 Remote decoder circuit. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation. HX2262 has a maximum of 12 bits of tri-state address pins providing up to 531,441 (or 312) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities.

2. Features

  • Low-power CMOS technology
  • Low SNR
  • Up to 12 Tri-State code addresses pins
  • Up to 6 Data pins
  • Operating voltage range: 3 to 18V
  • Instantaneous or output latch
  • DIP package
  • RC oscillator

3. Applications

  • Car security system home security / automation system
  • Garage door controller
  • Fans remote home security / automation systems
  • Industrial remote control
  • Toys with remote control

4. Pinout

Pinout
18-lead package
Pinout
20-lead package
Pin name Input/Output Note
1 ~ 6 1 ~ 6 A0 ~ A5 I

Code Address Pin Nos.0 ~ 5 These six tri-state pins are detected by HX2262 to determine the encoded waveform bit 0 ~ bit 5. Each pin can be set to “0”, “1” or “f” (floating).

7 ~ 8 10 ~ 13 7 ~ 8 12 ~ 15 A6/D5 ~ A11/D0 I

Code Address Pin Nos.6 ~ 11/Data Pin Nos.5 ~ 0. These six tri-state pins are detected by HX2262 to determine the encoded waveform bit 6 ~ bit 11. When these pins are used as address pins, they can be set to “0”, “1”, or “f” (floating). When these pins are used as data pins, they can be set only to “0” or “1”.

14 16 TE I

Transmission Enable. Active Low Signal. HX2262 outputs the encoded waveform to DOUT when this pin is pulled to low.

15 17 OSC1 O

Oscillator Pin No.1

A resistor connected between these two pins determine the fundamental frequency of the HX2262.

16 18 OSC2 I

Oscillator Pin No.2

17 19 Dout Pin O

Data Output Pin. The encoded waveform is serially outputted to this pin. When HX2262 is not transmitting, DOUT outputs low (Vss) voltage.

18 20 Vcc -- Power positive
9 9 Vss -- Power negative
-- 10 ~ 11 NC -- --

HX2262 package.jpg HX2262 pinout.jpg

HX2262 application.jpg

<google>HX2262-HX2272</google>

id=siteTree