HX2262 Remote encoder circuit: Difference between revisions

From Yggenyk
Jump to navigation Jump to search
No edit summary
 
(26 intermediate revisions by the same user not shown)
Line 1: Line 1:
==1. Description==
[[Category:English pages]]
HX2272 / 2262 is a remote control for decoding circuit. The chipset using CMOS technology. The pin-site data and coding through a serial code for the application of RF or IR model. HX2272 have up to three of the 12-bit address pins provide 531,441 addresses code, which greatly reduce any wrong code and the possibility Series yards. Meanwhile HX2272 counterpart different applications have different options: multiple data output pin; Latch output; Instant output.  
[[Category:Electronics]]
[[Category:Elektronik]]
<google>HX2262-HX2272</google>
HX2262 is equivalent to PT2262
* [[Remote controlled switch with HX2262 and HX2272]] look what's inside.
* [http://www.princeton.com.tw/downloadprocess/downloadfile.asp?mydownload=PT2262_1.pdf  PT2262 Datasheet]
* [http://www.datasheetcatalog.net/cgi-bin/helo.pl?text=PT2262 PT2262 Application note]


==2. Features==
===1. Description===
*The low-power CMOS technology
HX2262 is a remote control encoder for encoding signals to be decoded by the [[HX2272 Remote decoder circuit]].
*SNR up to 12 three-pin-code addresses can
It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation.
* 6 Data-pin wide
HX2262 has a maximum of 12 bits of tri-state address pins providing up to 531,441 (or 312) address codes; thereby,
*Operating voltage range: 3 to 18V
drastically reducing any code collision and unauthorized code scanning possibilities.
*Instantaneous output latch
*DIP package
*RC oscillator


==3 Applications==
===2. Features===
* Low-power CMOS technology
* Low SNR
* Up to 12 Tri-State code addresses pins
* Up to 6 Data pins
* Operating voltage range: 3 to 18V
* Instantaneous or output latch
* DIP package
* RC oscillator
 
===3. Applications===
*Car security system home security / automation system
*Car security system home security / automation system
*Garage door controller
*Garage door controller
Line 18: Line 31:
*Toys with remote control
*Toys with remote control


==4. Pinout==
===4. Pinout===
 
{|width="100%"  border="1" cellpadding="2" cellspacing="0"
{|width="100%"  border="1" cellpadding="2" cellspacing="0"
|-
|-
!style="color:#ffb900"|Pinout<br>18-lead package
!style="color:#ffb900"|Pinout<br>18-lead package
!style="color:#ffb900"|Pinout<br>20-lead package
!style="color:#ffb900"|Pin name
!style="color:#ffb900"|Pin name
!style="color:#ffb900"|Input/Output
!style="color:#ffb900"|Input/Output
!style="color:#ffb900"|Note
!colspan="2" style="color:#ffb900"|Note
|-
|-
|1 ~ 6
|1 ~ 6
|1 ~ 6
|A0 ~ A5
|A0 ~ A5
|I
|I
|# # 0 -5 yards address pins. HX2272 3 through 6 of this state of the pin to determine bit0 - bit5 coding waveform. Each pin respectively were home to "0" and "1" or "f" (vacant)
!colspan="2"|
Code Address Pin Nos.0 ~ 5
These six tri-state pins are detected by HX2262 to
determine the encoded waveform bit 0 ~ bit 5.
Each pin can be set to “0”, “1” or “f” (floating).
|-
|-
|7 ~ 8 10 ~ 13
|7 ~ 8 10 ~ 13
|7 ~ 8 12 ~ 15
|A6/D5 ~ A11/D0
|A6/D5 ~ A11/D0
|I/O
|I
|# 6 # 11 yards address pins or # 5 # -0 data output pin. According to the different specifications HX2272 suffix, as a high six-pin code can address pins can be used as data output pin. When these pins used as a pin-code addresses, each pin can be home to "0" and "1" or "f" (vacant). When used as a data output pins, at the same time comply with the following two conditions under the premise of output "1" (Vcc), or "0" (Vss). (1), accepted by the address coding and code addresses waveform input settings matching;
!colspan="2"|
(2), corresponding to the receiver of the data output for the home, "one."  
Code Address Pin Nos.6 ~ 11/Data Pin Nos.5 ~ 0.
These six tri-state pins are detected by HX2262 to
determine the encoded waveform bit 6 ~ bit 11.
When these pins are used as address pins, they
can be set to “0”, “1”, or “f” (floating).
When these pins are used as data pins, they can
be set only to “0” or “1”.
|-
|14
|16
|TE
|I
!colspan="2"|
Transmission Enable.
Active Low Signal. HX2262 outputs the encoded
waveform to DOUT when this pin is pulled to low.
|-
|15
|17
|OSC1
|O
|
Oscillator Pin No.1
| rowspan=2 style="border-bottom:3px solid grey;" valign="top" |
A resistor connected between these two pins determine the fundamental frequency of the HX2262.
|-
|16
|18
|OSC2
|I
|
Oscillator Pin No.2
|-
|17
|19
|Dout Pin
|O
!colspan="2"|
Data Output Pin.
The encoded waveform is serially outputted to this
pin. When HX2262 is not transmitting, DOUT
outputs low (Vss) voltage.
|-
|18
|20
|Vcc
| --
!colspan="2"|Power positive
|-
|9
|9
|Vss
| --
!colspan="2"|Power negative
|-
| --
|10 ~ 11
|NC
| --
!colspan="2"|--
|}
|}
[[Image:HX2262 package.jpg]]
[[Image:HX2262 pinout.jpg]]
[[Image:HX2262 application.jpg]]
<google>HX2262-HX2272</google>

Latest revision as of 11:02, 30 August 2008

<google>HX2262-HX2272</google> HX2262 is equivalent to PT2262

1. Description

HX2262 is a remote control encoder for encoding signals to be decoded by the HX2272 Remote decoder circuit. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation. HX2262 has a maximum of 12 bits of tri-state address pins providing up to 531,441 (or 312) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities.

2. Features

  • Low-power CMOS technology
  • Low SNR
  • Up to 12 Tri-State code addresses pins
  • Up to 6 Data pins
  • Operating voltage range: 3 to 18V
  • Instantaneous or output latch
  • DIP package
  • RC oscillator

3. Applications

  • Car security system home security / automation system
  • Garage door controller
  • Fans remote home security / automation systems
  • Industrial remote control
  • Toys with remote control

4. Pinout

Pinout
18-lead package 		Pinout
20-lead package 		Pin name Input/Output Note
1 ~ 6 1 ~ 6 A0 ~ A5 I

Code Address Pin Nos.0 ~ 5 These six tri-state pins are detected by HX2262 to determine the encoded waveform bit 0 ~ bit 5. Each pin can be set to “0”, “1” or “f” (floating).

7 ~ 8 10 ~ 13 7 ~ 8 12 ~ 15 A6/D5 ~ A11/D0 I

Code Address Pin Nos.6 ~ 11/Data Pin Nos.5 ~ 0. These six tri-state pins are detected by HX2262 to determine the encoded waveform bit 6 ~ bit 11. When these pins are used as address pins, they can be set to “0”, “1”, or “f” (floating). When these pins are used as data pins, they can be set only to “0” or “1”.

14 16 TE I

Transmission Enable. Active Low Signal. HX2262 outputs the encoded waveform to DOUT when this pin is pulled to low.

15 17 OSC1 O

Oscillator Pin No.1

A resistor connected between these two pins determine the fundamental frequency of the HX2262.

16 18 OSC2 I

Oscillator Pin No.2

17 19 Dout Pin O

Data Output Pin. The encoded waveform is serially outputted to this pin. When HX2262 is not transmitting, DOUT outputs low (Vss) voltage.

18 20 Vcc -- Power positive
9 9 Vss -- Power negative
-- 10 ~ 11 NC -- --

HX2262 package.jpg HX2262 pinout.jpg

HX2262 application.jpg

<google>HX2262-HX2272</google>

id=siteTree

Retrieved from "http://yggenyk.dk/index.php?title=HX2262_Remote_encoder_circuit&oldid=3094"