HP iPAQ rx59XX Travel Companion (rx5910 rx5915 rx5935 rx5940 rx5965)

• Technical specification and difference between models
• Download and Support

Troubleshooting BT Phone Manager

If BT Phone Manager stops working when you open it from the Settings page you can't connect to a GPRS phone.

The problem can be fixed by running the BTPhoneManager.exe in the Windows folder. This is a hidden file so you need to select Menu - Show All Files in the FIle Explorer to show hidden files. Running BTPhoneManager.exe from the Windows folder will repair the shortcut.

There is also a copy of BTPhoneManager.exe in Program FIles\BTPhoneManager this can't be run I guess it is from here it is installed to the Windows folder. If you try to run it you will get: The file 'BTPhoneManager' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.

hpLauncher

If hpLauncher stops working use File Explorer to find it in the Windows folder and run it once from here. The shortcut in Start - Programs will still fail. It needs to be replaced by a new one.

• hpLauncher on iPAQ rx5765 can't open
• HPLauncher problem (rx59xxx series)
• hpLuancher in ipaq rx 5940
• rx5915 sync problems (and others)
• 10 hard resets (rx 59xx series) is enough

Phone keeps calling with GPRS when using Internet Explorer even if a wireless network connection exists

Go to Start - Settings - Connections - Network Cards. Click on the Network Adapters tab at the bottom. Set "My network card connects to:" to "The Internet".

Switch between GPRS and WiFi How to tell the device to use WiFi instead of GPRS:
Go to Settings > conenctions tab > connections icon > advanced tab >
select network and choose "my work network" for Internet access.

Windows Mobile Device Center

Don't enable both bluetooth and USB at the same time, then you won't get a connection. The pocketPC will show up as a Network Device with an error.

Error installing Microsoft Windows Mobile Remote Adapter

I got my Pocker PC back from repair.
After reconnecting it to my Windows Vista PC it tried to install a new "Microsoft Windows Mobile Remote Adapter #2".
This failed.

To solve the problem I did the following:

1. Disconnect the device and reboot
2. Start a command prompt as administrator
3. In the command prompt type the following commands
   • set devmgr_show_nonpresent_devices=1
   • devmgmt.msc
4. In the device manager uninstall Microsoft Windows Mobile Remote Adapter
5. Reconnect the device again, now it will install "Microsoft Windows Mobile Remote Adapter" with succes

Memory handling in Windows Mobile 5.0

• Chris De Herrera's Windows CE Website
• Windows Mobile 5.0 Soft Reset
• Windows Mobile 5.0 Memory Management

• Platform Builder for Microsoft Windows CE 5.0 Memory Architecture

• Why Persistent Storage Is A Good Thing

<google>ENGELSK</google>